ARM's popular JTAG-based debug system, RealView Multi-ICE® provides industry standard support for established ARM core-based devices which contain the Embedded-ICE® logic. The Multi-ICE run control unit allows the core to be started and stopped under control of the connected debugger software. The user can then examine and modify registers and memory, and set breakpoints and watchpoints. Multi-ICE also provides support for code download, trace and RealMonitor™ for real-time debug. Multi-ICE augments the features and usability of the ARM tool chain with: - Download: 130KB/s with 10MHz JTAG Clock
- Stepping speeds greater than 50/second
- Supports wide range of established ARM cores. Discover more ...
- Debug of very low voltage cores (down to 1V)
- Debug of slow (sleep mode) or variable frequency designs
- Code download to Flash memory
- Host console I/O services (such as printf) without stopping the processor
- Attach to an already running target without halting
Further Details - Powered from target or external power supply for hot plugging and use with battery powered targets
- User-controlled input/output bits
- Supports RDI compliant debuggers:
- Stop and start synchronization between microprocessors in multi-core ASICs
- Auto-detection and manual configuration capability for devices within an ASIC
- Programmable JTAG bit transfer rates
Flash Download and Board Configuration
Multi-ICE 2.2 together with the ARM debugger supports the download of code to several types of Flash memory and the loading of configuration data into programmable devices on ARM's RealView Hardware Platforms. Supported Platforms
Windows 95, 98, 2000, XP, ME For users of Multi-ICE versions 1.4, 2.0, 2.1 with a valid support and maintenance (S&M) contract you can upgrade to version 2.2 free of charge. To do this contact the company that your S&M contract is with (normally your original supplier) quoting one of the following forms of verification: - Multi-ICE invoice supplied by ARM
- Purchase order for Multi-ICE product
- Serial number of Multi-ICE unit(s)
If you do not have a valid S&M contract, then you will need to renew your contract in order to obtain the upgrade. Please contact your supplier for details of how to renew your S&M contract. Discover more ... | 
